Our Products - Quick Drying Finish Paint
| TECHNICAL DATA SHEET |
| Product Description |
This primer is based on specially made quick drying Alkyd resin. |
| Recommended Uses |
Used for metal , concrete surfaces where very fast drying ,excellent scratch resistance is required. |
| PRODUCT SPECIFICATION |
| Mixing Ratio |
One pack |
| Colour |
Redoxide , Grey , Yellow or any other inert shades. |
| Finish |
Matt – Semi Glossy |
| Pot Life |
N.A. |
| Volume Solids |
35 % ± 5 depending on shades . |
| Flash point |
More than 24 �C |
| Recommended DFT |
25-30 microns per coat |
| Covering Capacity |
8 to 10 sq. mtrs / ltr |
| (Theoretical) |
- |
| Stoving Schedule |
N.A. |
| Drying Time |
Surface dry – 15 to 20 mins at 30 �C & 65 % Relative Humidity
Hard Dry – 4 to 5 hrs max at 30 �C & 65 % Relative Humidity |
| Recoating Time |
Minimum : 2 hrs Max : None |
| Method of Application |
Brush / Conventional Spray |
| Thinner recommended |
‘ Spectracoat ’ Thinner |
| Shelf life |
12 months under normal storage conditions in original sealed containers.
|
| Surface Preparation |
Surface should be free from oil , grease , moisture and any other foreign matter.
|
| Remarks 1. Application Data |
| Method |
Pressure ( Atm) |
Nozzle |
Thinner |
Thinner volume |
| Conven. Spray |
4 – 5 |
|
Spectracoat Thinner |
15 – 20 % |
| Brush / Roller |
- |
-
|
Spectracoat Thinner |
0 – 5 % |
2. Don’t use below 10 �C
3. Stir well before and while using .
4. Film thickness other than indicated also possible.
| Safety Precautions : |
| Provide sufficient ventilation while working with solvent based paints in confined spaces and stagnant air. |
Keep the material away from heat , spark and direct flame |
| Avoid inhalation of solvent vapour or paint mist by using facial mask .Use goggles and gloves to protect against direct contact of paint with
skin and eyes. |
In case of contamination , rinse with fresh running water and seek medical help at once. |
| Follow local & national safety rules. |
| Special Comments : |
| Thinner consumption and actual coverage of paint depends on the site conditions. |
Stir the paint well before painting and while painting if necessary. |
| Material should be stored at 30 �C temperature in dry place.
|
